Setting Date and Time
1Press the [MENU] Button and rotate the [PUSH] Dial to select
CLOCK-SET
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
YEAR :2001
MONTH :OCT
DAY :102Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/
HOUR : 2PM
MINUTE:30[DAY]/[HOUR]/[MINUTE] and set it to a desired value.
eYear will cycle in the order shown below.
PUSH MENU TO RETURN2000 ) 2001 ) ... ) 2089 ) 2000 ) ...
3Press the [MENU] Button to finish setting the date and time.
eThe clock operation starts from [00] seconds.
eThe menu will disappear when the button is pressed again.
eIt is possible that the built-in clock in the Camera/Recorder may become
inaccurate. Please check the time before recording. If the [0 ] Indication is
flashing, charge the internal lithium battery and reset the date and time.
MENU1, 3
PUSH
VOL/JOG1, 2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the
[0 ] Indication is lit, the internal lithium battery is near exhaustion.
1Connect the AC Adaptor to the Camera/Recorder with the
power turned off and then connect to the AC Jack.
eAfter charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
CAMERA FUNCTIONS
A desired recording speed can be selected with [REC-SPEED] on the
1. CAMERA SETUP
2. DIGITAL EFFECT[RECORDING SETUP] Sub-Menu. 1
3. CARD SETUP
4. MULTI-PICTURES
5. RECORDING SETUP
6. DISPLAY SETUP
7. OTHER FUNCTIONSIf LP Mode is selected, the recording time becomes 1.5 times longer
PUSH MENU TO EXITthan that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some
1
RECORDING SETUPfunctions may be restricted.
REC-SPEEDSPLPeThe contents that are recorded in LP Mode are not completely compatible
AUDIO-REC12bit
INDEX2HOURwith other equipment.
WIND-CUTOFF
eAudio Dubbing is not possible with LP Mode. (l 33)
RETURN----~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUSHMENU TO EXIT
Audio Recording Mode
2
RECORDING SETUPThe sound quality of the recorded sound can be selected with [AUDIO-REC]
REC-SPEEDSP
AUDIO-REC12bit16biton the [RECORDING SETUP] Sub-Menu. 2
INDEX2HOUR
WIND-CUTOFFHigh quality sound recording is possible with ?16bit 48kHz 2 track? Mode.
With the ?12bit 32kHz 4 track? Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
RETURN----
PUSHMENU TO EXIT
19 |
ACEC
