Setup (Initial Settings)
The unitOs main settings can be performed and
checked using the on-screen menus which appear onPress the MENU-UP button or MENU-DOWN4
the video monitor connected to the unit.button to move the cursor () to the item
It is also possible to perform and check the settingswhere the changes are to be made.
using the item numbers and setting numbers whichThe page can be scrolled up or down by pressing
appear on the front panelOs display.the MENU-UP button or MENU-DOWN button
One user setting memory set is provided with the unitwhile holding down the MODE button.
to enable the desired settings to be stored in the
memory ahead of time for use.
5Press the DATA+ or DATA� button to change
the setting.
The setting value will flash while changes to the
setting are being performed.How to perform the settings
using the on-screen menus
6Press the SET button to enter the setting.
To change another item, repeat steps 4, 5and
1Set the LOCAL/MENU/REMOTE switch to the6.
MENU position.<Note>
The unit is now set to the menu setting mode,The setting can be canceled by pressing the
and the menu screen appears on the videoMODE button. To change another item without
monitor.entering a setting, press the MODE button, and
repeat steps 4, 5and 6.
SET�UP MENUMAIN
NO.00
00 SYSTEM7Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.000 BASIC
The menu setting procedure is now terminated.100 OPERATION
200 INTERFACE
400 TAPE PROTECT
500 TIME CODE
600 VIDEO
700 AUDIO
END
How to restore the factory
In the menu setting mode, the REW, STOP, FF,
PLAY, PAUSE/STILL and REC buttons serve assettings
the MODE, MENU-DOWN, MENU-UP, DATA�,
DATA+ and SET buttons.
1Set the LOCAL/MENU/REMOTE switch to the
MENU position.
2Press the MENU-UP button or MENU-DOWNThe unit is now set to the menu setting mode,
button to move the cursor () to the menuand the menu screen appears on the video
where the changes are to be made.monitor.
Press the SET button to set the item.3Press the RESET button.2
To return to the menu screen, press the SETThe unit is set to the default setting mode, and
button while holding down the MODE button.the default setting screen appears on the video
monitor.
SELECTMODE
ESCAPE
LOAD
SAVE
PROTECT
23 |