Parts and their functions
15600K switch [5600K MODE]SHADINGCONTROL
WHITEBLK
BLACK WHITERGBKNEECLIPGAMMAUNDO
This is used to change the amplification rate of the GBR
?
signals by an electrical circuit to achieve a white balance>PEDFLAME GAMMAGAINHD. DTL SD. DTL MATRIXSYSTEMFUNC
that corresponds to the color temperature of 5600K.
When it is pressed, the B video signal is attenuated by
approximately -6 dB, the R video signal is boosted by
approximately 3 dB, and the G video signal is not@
attenuated. Select this switch setting for shooting under a
5600K light source or shooting outdoors.
When the lamp of the switch is off, the white balance is
made to correspond to a color temperature of 3200K.
A
2Flare OFF switch [FLARE OFF MODE]
This is used to cancel the flare correction function (which
>Adjustment item up and down shift switches [3, 4]
suppresses the rise of the pedestal in proportion to the
These are used to scroll the control item display indicated by
light quantity). Its lamp lights when the function is
one of the control item selector switches ? up or down.
canceled.
?Control item selector switches
3Black gamma ON switch [BL-K GAMMA ON MODE]
When these switches are selected (when their lamps are
This is used to enable the black gamma function (which
lighted), the corresponding adjustment items and adjustment
changes the video signal amplification rate in parts where
values appear on the LCD display. The adjustment values
the light quantity is low). Its lamp lights when the function
can be changed by one of the 16 adjustment rotary
is enabled.
encoders.
4Gamma OFF switch [GAMMA OFF MODE]
1324567
This is used to cancel the gamma correction function
SHADINGWHITEBLK
(which provides the signal level of the video signals withBLACK WHITERGBKNEECLIPGAMMAUNDO
the reverse characteristics matching the TV video signal
input and light-emitting level characteristics). Its lamp
PEDFLAME GAMMAGAINHD. DTL SD. DTL MATRIXSYSTEMFUNC
lights when the function is canceled.
5This switch is not supported at the present time.
89:;<=>?@
6Knee OFF switch [KNEE OFF MODE]1Black shading control switch
This is used to cancel the knee function that attenuates[BLACK SHADING CONTROL]
those parts of the video signals where a particular levelThis is used to correct the black shading (the coloring of
(knee point) has been exceeded so that they will notblack images.) When it is pressed and its lamp is lighted
become saturated as easily. Its lamp lights when theand when one of the SHADING R, B or B switches is then
function is canceled.pressed and selected, the adjustment items for the black
shading appear on the LCD display. The black shading
7White clip OFF switch [WHITE CLIP OFF MODE]correction can be adjusted using four of the 16 adjustment
This is used to cancel the white clip function by which therotary encoders.
video signal output is clipped (saturated). Its lamp lights
when the function is canceled.
HSAWHPARVSAWVPAR
100490+7
8Matrix ON switch [MATRIX ON MODE]
This is used to enable the matrix function by which the
HSAW: Horizontal sawtooth wave correction
chroma saturation is compensated for the G (green), B
This is used to correct the coloring of black screen images
(blue), R (red), Ye (yellow), Cy (cyan) and Mg (magenta)
signals and by which the chroma saturation and hue arein the horizontal direction in the range of -100 to 100.
When the numerical setting is incremented, the video level
compensated for the I (skin tone) signals. Its lamp lights
at the left of the screen is increased.
when the function is enabled.
HPAR: Horizontal parabola correction
9HDTV detail OFF switch [HD.DTL OFF MODE]
This is used to correct the coloring of black screen images
This is used to cancel the detail enhancer function that
in the horizontal direction in the range of -100 to 100.
enhances (adjusts the relative hardness/softness) of the
When the numerical setting is incremented, the video level
picture quality in the detailed parts of the HDTV video
at the left and right of the screen is increased.
output. Its lamp lights when the function is canceled.
VSAW: Vertical sawtooth wave correction
:SDTV detail OFF switch [SD.DTL OFF MODE]
This is used to correct the coloring of black screen images
This is used to cancel the detail enhancer function that
in the vertical direction in the range of -100 to 100. When
enhances (adjusts the relative hardness/softness) of the
the numerical setting is incremented, the video level at the
picture quality in the detailed parts of the SDTV video
top of the screen is increased.
output. Its lamp lights when the function is canceled.
7 |
ACEC
