Shutter SpeedSynchro-scanRequired luminance ratio0 dB:0 dB should be selected in normal cases.
OFF-11 dB - 30 dB:Use this range if sufficient video out-
1/10099.68 Hz2put cannot be obtained even when the lens iris
1/250250.0 Hz4is opened in shooting dark scenes.
1/500492.2 Hz8
N/Eye (Night Eye):Sensitivity is increased by
1/1 000984.4 Hz16
adding the digital gain up to 30 dB.
1/2 0001.969 kHz32
1/4 0003.938 kHz64
1/10 0007.875 kHz160Notes
#4 CCD Read Out Mode Setting [Field/Frame:" Only 0 dB, 9 dB, or 18 dB, AGC LOW, AGC
HIGH can be selected in case of using the RCU
Field/Frame 1/Frame 2]
Field:CCD storage will be by field storage.(RCB).
Frame 1:Vertical resolution increases in frame stor-If the lens iris switch is at MANUAL, when operat-
ing the camera alone or when the iris switch on
age.
Frame 2: Vertical resolution is raised withoutthe RCU (RCB, Hybrid control panel) is at AUTO,
increasing residual images by frame storageAGC may not function.
" AGC HIGH when the AGC selection switch on the
and electronic shutter.
hybrid control panel is at AGC.
#5 Gain Up Setting [Gain: AGC HIGH / AGC LOW /" 0 dB when the manual gain switch on the hybrid
control panel is at LOW, 9 dB when it is at MID,
0 dB - 30 dB / N/Eye]
AGC LOW: The Auto Gain Up control with a maxi-or 18 dB when it is at HIGH.
mum gain increase of about 18 dB adjusts theManual GAINAGC
luminance automatically.
GAINAUTO/AIWAWCABCG/L PHASE
AGC HIGH: The Auto Gain Up control with a maxi-OPERATEHIGHAGCON
ATW90° 180°SCH
0° 270°
mum gain increase of about 30 dB operates. IfPOWERMIDOFF
ONLOWMANUA
MODESHUTTERSCENET.PEDCABLE COMP
the luminance is still insufficient, the Night EyeFILE
BARELCB1 .YC
(digital gain up) also adjusts the luminanceOFF1 / 1002 .3 .4 .
CAMOFF
automatically.
Hybrid Control Panel
-41- |
ACEC
