Controls and Their FunctionsSystem Connections (Indoor Pan/tilt Head System)
$ Priority SwitchboxO Turn off the power to all pieces ofCord clamper
equipment before making any
connections.
O For the control panel, use the AC
adapter model AW-PS301 (sold
separately), for the multi port hub and
multi control hub, the AC adapter model
AW-PS505 (sold separately), and for the
<
pan/tilt head AC adapter model, the AW-
DC cord
PS300 (sold separately).
< Priority Switchbox ContactsThe connection terminals differ dependingOUse an AW-PH300 series pan/tilt head
(Terminal Panel)on the control panel model. The correctand a camera from the convertible
These are the output contacts of theconnection terminals are listed below.camera series.Control panel AC adapter:
priority switchbox. They should beAW-RP301:Use camera cable AW-CA50 T15 (soldAW-PS301
connected to the TALLY terminals onTALLY HOT and GND terminals.
separately) to make connections
the control panel. These terminals areAW-RP305:between the pan/tilt head and camera.
not polarized. Make connections usingAny of terminals TALLY 1 throughO Connect the pan/tilt head (AW-PH300)
cable conforming to the ElectricalTALLY 5 and the GND terminal. (Maketo its AC adapter (AW-PS300) using a
Equipment Handling Law and with asure that the pan/tilt head control
DC power cord (cable conforming to the
Iris control cable
nominal cross-sectional area of 0.128connector number to which the AW-Electrical Equipment Handling Law and
mm (wire number AWG26) or more.HB605 is connected and the TALLYwith a nominal cross-sectional area of2Remote (zoom/focus
control) cable
The maximum cable length (distanceterminal number to which the priority1.25 mm2 or more, to be obtained
between priority switchbox and controlswitchbox is connected match.)locally). The maximum cable distance
panel) is 10 meters.Also, if the pan/tilt head is beingbetween the pan/tilt head and its AC
controlled via the AW-HB605, it is
adapter is 30 meters.
necessary to select the number to whichConnect the multi control hub to its AC
O
the AW-HB605 is connected using the
adapter (AW-PS505).
pan/tilt head selector switch of the AW-
O Connect the multi port hub to its AC
RP305.adapter (AW-PS505).To iris connector
AW-RP501:OConnect the control panel (AW-RP301,
TALLY HOT and GND terminals.AW-RP305, AW-RP501, AW-RP505) to
AW-RP505:its AC adapter (AW-PS301). Use a cord
TALLY 5 and GND terminals.
clamper to secure the DC cord of the
AC adapter and prevent the DC plug
To lens interface
from coming loose accidentally.
connector
O Connect the pan/tilt head and the
convertible camera using the AW-CA50
T15 camera cable.
O Connect the electric zoom lens iris
control cable to the camera and the
remote (zoom and focus control) cable
to the pan/tilt head.
1011 |
ACEC
