Operating Instructions
?
2.7Using UPnP (Universal Plug and Play)
UPnP? can automatically configure your router to make it accessible from the
Internet. In order to use this feature, your router needs to support UPnP?, and it
must be enabled. UPnP? is disabled on most routers by default. Most router
manufacturers disable this feature as the default setting.
See http://panasonic.co.jp/pcc/products/en/netwkcam/ and your router's
manual for details of how to enable UPnP?. After UPnP? is enabled on the router,
set [Enable] for auto port forwarding.
Note
The camera?s UPnP? does not support IPv6. Use this feature in IPv4.
1.Click [UPnP] on the Setup page.
2.Set up UPnP?.
SettingDescription
Auto Port If the network setting is [Status] or [DHCP], enabling
Forwardingauto port forwarding allows you to access the camera
from the Internet.
Note
If the network setting is [Automatic Setup], also enable
[Allow Access from the Internet] on the Network page
(see page 40).
Display Shortcut Enabling this creates a shortcut to the camera in the
Icon in My Network My Network Places folder.
Places
Note
To enable this feature when using Windows XP or
Windows Me, enable the UPnP? Windows component
beforehand (see page 165).
3.Click [Save] when finished.
The new settings are saved.
When finished, "Success!" is displayed.
57 |
ACEC
