Installation Kits Contents
NO.NAME OF PARTSQ'TY
1234
1FRAME CURTAIN2
2SILL SUPPORT2
3BOLT2
4NUT2
5SCREW(TYPE A) (10mm (25/64")) 16
5678119
6SCREW(TYPE B)D5.1mm (3/16")/16mm (5/8")3
7SCREW(TYPE C)D4.1mm (5/32")/16mm (5/8")5
8FOAM-STRIP1
109FOAM-PE (600mm x 25mm x 2mm)1
10WINDOW LOCKING BRACKET1
11FOAM-PE (920mm x 30mm x 2mm)1
12DRAIN PIPE1
12 Top retainer bar
is in the product
package.
Suggested Tool Requirements
SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
Shipping
PREPARATION OF CHASSISScrews
1. Remove the screws which fasten the cabinet
at both sides and at the back.
FeaturesandInstallation
2. Slide the unit from the cabinet by gripping the
base pan handle and pulling while bracing the
cabinet.
3. Cut the window sash seal to the proper
length.
Peel off the backing and attach the FOAM-PE
to the underside of the window sash.
4. Remove the backing from the top upper guide
FOAM-PE and attach it to the bottom of
the upper guide
5. Attach the upper guide onto the top of the
cabinet with 3 type A screws.
119
6. Insert the Frame Curtain into the upper
guide.
(Type A)
5
7. Fasten the curtains to the unit with 4 Type
A screws.
Lower guide
5
5
(Type A)
11 |
ACEC
