Installation Kit Contents
NO.NAME OF PARTSQ'TY
12341FRAME CURTAIN2
2SILL SUPPORT2
3BOLT2
4NUT2
56781195SCREW(TYPE A) (10mm (25/64")) 16
6SCREW(TYPE B)D5.1mm(3/16")/16mm(5/8")3
7SCREW(TYPE C)D4.1mm(5/32")/16mm(5/8")5
8FOAM-STRIP1
109FOAM-PE (466mm x 10mm x 2mm)1
10WINDOW LOCKING BRACKET1
11FOAM-PE (920mm x 30mm x 2mm)1
12DRAIN PIPE1
12
Top retainer bar is
in the product
package.
Suggested Tool Requirements
SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
Shipping
Screws
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet
at both sides and at the back.
2. Slide the unit from the cabinet by gripping the
base pan handle and pulling while bracing the
cabinet.
3. Cut the window sash seal to the proper
length.
Peel off the backing and attach the FOAM-PE
to the underside of the window sash.
4. Remove the backing from the top upper guide
FOAM-PE and attach it to the bottom of
FeaturesandInstallation
the upper guide
5. Attach the upper guide onto the top of the
cabinet with 3 type A screws from underneath
119the top of the cabinet.
6. Insert the Frame Curtain into the upper
(Type A)guide.
5
7. Fasten the curtains to the unit with 4 Type
5A screws.Lower guide
5
(Type A)12
Lower guide |
ACEC
