¤
Functions of HDMI24p Output for DVD-Video
Perform step 1 of Accessing the Setup Menu (Ľ 52).When this unit is connected to a TV supporting 1080/24p output
via an HDMI cable, this unit displays each frame at 1/24 second
intervals the same interval originally shot with the lm camera.
3 , 4 to select TV Screen, then
After selecting Functions of HDMI (Ľ left, step 3).
1
3 , 4 to select 24p Output for
3 , 4 to select Functions of
DVD-Video, then OK
HDMI, then OK
HDMI Priority
3 , 4 to select On or Off, then
After selecting Functions of HDMI (Ľ above, step 3).
OK
[On] Set to On and then set the Progressive/24p in the
3 , 4 to select HDMI Priority,
Video Menu in the On-screen Menu (Ľ 51) to 24p.
then OKWhen the video is being output in 24 frames per
second, no video is output from a video terminal other
than the HDMI terminal.
¤
3 , 4 to select On or Off, then HDMI Output Display Aspect
OKSettings used when 4:3 aspect video is output on the television
as 16:9 aspect.
[Off] When connecting equipment such as an ampli er with After selecting Functions of HDMI (Ľ left, step 3).
an HDMI cable, and connecting TV (compatible with
progressive video) with a Component Video Cable
3 , 4 to select HDMI Output
¤
HDMI ResolutionDisplay Aspect, then OK
You can only select items compatible with the connected
equipment. This setting normally does not need to be changed.
However if you are concerned about output picture quality, it
3 , 4 to select Full or Normal,
may be improved by changing the setting.
� To enjoy High Quality Video up-converted to 1080p, you need then OKSetting Menus
to connect the unit directly to a 1080pcompatible HDTV. If this
unit is connected to an HDTV through other equipment, it must
[Full] Video output is enlarged to match the screen size.
also be 1080p compatible.
[Normal] Video is output as 4:3 aspect. Side panels (black
After selecting Functions of HDMI (Ľ above, step 3).
bars on the left and right) will appear on the
screen.
3 , 4 to select HDMI
Resolution, then OK Notes
Depending on the equipment to connect, some items may
be shaded in gray on the display and cannot be selected, or
changing settings may be unavailable.
¤
Above items can be set when you set HDMI Priority to
3 , 4 to select the item, then
On.
OK
[Auto] Automatically selects the output resolution best
suited to the connected television (1080p, 1080i,
720p or 480p).
[480i]
[480p]
[720p]
[1080i]
[1080p] When setting video output to 1080p, we
recommend using a Panasonic HIGH SPEED
HDMI cable to prevent video distortion.
59
RQT9058
%%.3&"71JOEC. 3&"71JOEC |
ACEC
