Printer cannot print
Removing a Paper Misfeed
2 Bin Finisher (FA-F365)
H
Removing Paper Jams from the Finisher Unit
If the host machine indicates the finisher paper jam message, perform the following to remove the
jam.
Note, however, that paper jams at the paper feed inlet on the finisher unit can be removed by
opening the front cover of the host machine as the Finisher-F1 is fixed to host machine.
Holding the finisher unit as shown,
move it to detach it from the host
1machine.
Remove any jam visible from the
outside.
2
Open the upper cover, and check
the inside of the finisher.
3
CMake sure that the misfeed indicator goes off after removing all misfed paper.
ATTENTION
64 |
ACEC
