Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not
described below.
Reference
SymptomCause/solution
pages
Y Are the cables appropriately connected to the video output
connector, S-VIDEO output connector, RGB/YPbPr output
connector, HDMI output connector, or SDI output connec-11, 12
tor, respectively?
Check whether each cable is appropriately connected.
No image displayed
Y Is the monitor luminance appropriately adjusted, or is the
contrast appropriately adjusted?
N
Check whether the monitor settings are appropriate.
Y Is the function setup switch No. 4 set to "ON"?
Camera with no response toSet the function setup switch No. 4 to "ON".
the button operation on the11
front face of the CCU
Y Pressing once displays the state.
Press the [SCENE] button repeatedly until your target LED
The lighting LED of thelights.9
[SCENE] button unchanged
Y Pressing once displays the state.
Press the [GAIN] button repeatedly until your target LED
The lighting LED of the [GAIN]
lights. 9
button unchanged
Y Is the camera cable appropriately connected at both the
connector of the CCU and the connector of the camera
Only the color bar displayedhead? 9
Check whether the connection is appropriately established.
Y Is the camera cable appropriately connected at both the
connector of the CCU and the connector of the camera
head?
The hue [MATRIX] unad-
Connection between the camera head and camera cable is9
justable in the menu
required to adjust the image quality.
Check whether the connection is appropriately established.
26 |
ACEC
