Basic TV to VCR (Accessory) Connection
The basic Antenna/Cable TV to Accessory DVD INPUT
CrCbY
(VCR, DVD Player, etc.) to TV connection is
shown at right. For other hookups (such as
IN2
those with Cable Boxes), refer to the owner sRRR
manual of the Cable Box or other Accessories.OUT
R-AUDIO-LVIDEO
Connect a yellow video cable to the
VIDEO IN2 jack on the rear of the TV
and to the VIDEO OUT jack on your
VCR (or other Accessories.)
Connect red and white audio cables
to the AUDIO IN2 jacks (left and right)
on the rear of the TV and to the DVD INPUTYCbCr75OHMANTENNAINPUT
IN2
AUDIO OUT jacks on your VCR (or OUTVIDEOAUDIORL--
other device.) Match the cable colors
to the jack colors.
Turn on the TV and the VCR.
Press the TV/AV button on the TV s
remote control until AV2 appears in the
upper right corner of the TV screen. There are AUDIO and VIDEO IN1 jacks
at the lower-right corner of the rear of the
When you play material on the VCR, DVD
TV set. To view material playing on equip-
player, etc. that is connected to the AUDIO
ment connected here, press the TV/AV so
and VIDEO IN2 jacks on the rear of the TV,
AV1 is shown on the TV.
it will appear on the TV on the AV2 channel.
There is also an S-VIDEO IN1 jack in this
area. Use S-Video connection if your DVD
player, camcorder, etc. has an S-Video Out
jack. S-Video provides a clearer picture than
the standard CVBS video (the yellow jack).
Choose the AV1 channel to view material
There are Component Video In jacks on
playing on equipment connected to the S-
the rear of the TV. These are labeled DVD
VIDEO IN1 jack.
INPUT Y, Cb and Cr and are red, blue and
Use either S-VIDEO IN1 jack or VIDEO IN1
green. Use these to connect a DVD player
jacks. Do not use both at the same time
Helpful Hintsthat has Component Video Out jacks. This
for the same piece of equipment.
will provide the best picture quality. Use
This would interfere with the picture display.
Audio and video cables are Component Video cables, which are not
If both are used, S-VIDEO IN1 has priority
not supplied with the TV but supplied with the TV.
over the yellow VIDEO IN1 jack.
are available from MagnavoxIf you connect the DVD player to the DVD
or electronics retailers. Audiojacks, set the TV to YUV channel to watch
cables are usually red and DVDs. Press TV/AV button on the remote
white. Video cables (CVBS) so YUV appears on the TV screen.IN1
are usually yellow.Use either DVD or VIDEO In2 jacks, but doR
You can connect the antennanot use both for the same piece of equipment. AUDIO
or Cable TV signal to either You only need one video connection per each
L
the ANTENNA IN jack on youraccessory (DVD player, etc.).
VCR or to the 75 OHM ANT-VIDEODVD INPUTYCbCr75OHMANTENNAINPUT
ENNA INPUT jack on the TV. IN2OUTVIDEOAUDIORL--
If you connect it to the VCR,
choose TV channels at the DVD INPUTS-VIDEO
YCbCr
VCR. Connect it to the VCR
if you want to record TV pro-
gramming through VCR.
Your VCR may not have Audio
DVD INPUTYCbCr75OHMANTENNAINPUT
and Video Out jacks, but onlyIN2
OUTVIDEOAUDIORL--
An RF or ANTENNA OUT jack.
Use a coaxial cable to connect
the VCR s ANTENNA OUT jack
to the TV s 75 OHM ANTENNA
INPUT jack.
7 |
ACEC
