Tips
Poor receptionThe proximity of mountains or high buildings may be responsible for ghost
pictures, echoing or shadows. In this case, try manually adjusting your picture: see
Fine Tune (p. 5) or modify the orientation of the outside aerial. If you are using an
indoor aerial, reception may be difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception remains poor, you will need to
use an external aerial
No pictureHave you connected the aerial socket properly? Have you chosen the right
system? (p. 5). Poorly connected euroconnector cables or aerial sockets are often
the cause of picture or sound problems (sometimes the connectors can become
half disconnected if the TV set is moved or turned). Check all connections.
No soundIf on certain channels you receive a picture but no sound,this means that you do not have
the correct TV system.Modify the System setting (p.5).
The amplifier connected to the TV does not deliver any sound? Check that you
have not confused the audio output with the audio input.
PC mode doesnOtCheck that you have configured the computer on a compatible display resolution
work ?(see p. 9).
Snowy pictureNoise is displayed if the connected digital equipmentOs (DVD player or set-top
when switched tobox) HDCP authentication failed. Check the user manual for the digital
HD-D modeequipment you are connecting.
Remote controlThe TV set does not react to the remote control; the indicator on the set no
longer flashes when you use the remote control? Replace the battery.
StandbyIf the set receives no signal for 15 mins, it automatically goes into standby mode.
To save power,your set is fitted with components that give it a very low power
consumption when in standby mode.
Cleaning the setOnly use a clean,soft and lint-free cloth to clean the screen and the casing of your
set.Do not use alcohol-based or solvent-based products.
Still no results?Disconnect the mains plug of the TV for 30 seconds then reconnect it.
If your TV set breaks down, never attempt to repair it yourself: contact your
dealer's after-sales service.
Glossary
DVI (Digital Visual Interface):A digital interfacebetter picture quality than with standard video
standard created by the Digital Display(VHS and 8 mm) where the Y/C signals are
Working Group (DDWG) to convert analogcombined to provide only one video signal.
signals into digital signals to accommodateNICAM sound: Process by which digital sound
both analog and digital monitors.can be transmitted.
HDCP (High-bandwidth Digital-ContentSystem:Television pictures are not broadcast in
Protection): developed by Intel to providethe same way in all countries.There are
secure copy protection of content transmitteddifferent standards:BG,DK,I,and L LO.The
digitally from the source (such as DVD playerSystemsetting (p.5) is used to select these
or set-top box) to the TV display.different standards.This is not to be confused
VGA (Video Graphics Array): a common standardwith PAL or SECAM colour coding.Pal is used
graphics display system for PCs.in most countries in Europe,Secam in France,
RGB signals :These are the three video signals,Russia and most African countries.The United
Red Green Blue, which make up the picture.States and Japan use a different system called
Using these signals improves picture quality.NTSC.The input EXT1 is used to read NTSC
S-VHS Signals: These are 2 separate Y/C videocoded recordings.
signals from the S-VHS and Hi-8 recording16:9: Refers to the ration between the length and
standards.The luminance signals Y (black andheight of the screen.Wide screen televisions
white) and chrominance signals C (colour) arehave a ration of 16/9, conventional screen TV
recorded separately on the tape.This providessets have a ration of 4/3.
14 |
ACEC
