1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United KingdomConnecting the cables
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
aRemovefusecoverandfuse.
bFixnewfusewhichshouldbeaBS13625A,A.S.T.A.or
BSI approved type.
cRefitthefusecover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.aInserttheaerialplugintothe2socket.
DNote: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13AbInserttheplugofthemainscableintothewallsocket.
socket elsewhere.
cIfthelittleredlightatthefrontpanelofthesetisnotlit,
How to connect a plug:please switch on the set. The power switch8 is
The wires in the mains lead are coloured in accordance withlocated on the left side panel of the set.
the following code:
BLUE - 'NEUTRAL' ('N')
BROWN - 'LIVE' ('L')Connecting a decoder or other equipment
dTheBLUEwiremustbeconnectedtotheterminalwhichYou can also connect additional equipment. For instance, a
is marked with the letter 'N' or coloured BLACK.satellite receiver, decoder or camcorder toEXT.1 or a
satellite receiver, or camcorder toEXT.2 .
eTheBROWNwiremustbeconnectedtotheterminal
which is marked with the letter 'L' or coloured RED.E If you don't connect a decoder, use theEXT.1 socket for
connecting other equipment.
fDonotconnecteitherwirestotheearthterminalinthe
plug which is marked with the letter 'E' or by the safetyYou can connect active speakers, a HiFi-stereo set or a 'Dolby
earth symbol\or coloured green or green-and-yellow.Prologic' decoder to the socketAUDIOOUTL/R (audio output
left/right).
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not imply over the
two wires.
4 |
ACEC
