Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorderVideo recorder (only)
Carry out the connections featured opposite. Use a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socke t ,t h e
only connection possible is via the aerial cabl e.You will therefo r e
need to tune in your video recorder's test signal and assign it
p r o g ramme number 0 (refer to manual store,p.5 ) .
To reproduce the video recorder picture,press .
Important:if your video recorder does not have A/V connections,
It will not be possible to record digital channels.
Other equipment connected to the scart
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections featured opposite.
Connecting your equipment to EXT2.
To select connected equipment
Press the X key to select E1 (EXT1), E2 (EXT2) or E2 Y/C for
S-VHS or Hi-8 equipment
Most equipment (decoder,video recorder) carries out the switching itself.
24 |
ACEC
