Adjusting the picture
Description of the settings:
& Press H then L.
The PICTURE menu appears :Y BRIGHTNESS: alters the brightness of the
image.
PICTURE
Y PICTUREY COLOUR: alters the colour intensity.
Y SOUND
Y FEATURESY BRIGHTNESS--I------ 39Y CONTRAST: alters the variation betweenY INSTALLY COLOUR
Y CONTRASTlight and dark tones.
Y SHARPNESSY S H A R P N E S S :alters the crispness of the image.
Y STORE
Y COLOUR TEMP.Y STORE: stores the picture settings.
Y NRY COLOUR TEMP (colour temperature):
adjusts the colour temperature of the
Ž Use I J keys to select a setting and K Lpicture.Three options are available here:
keys to adjust.COOL (blue white), NORMAL (balanced) or
Note:the menu is a scroll-down menu.WARM (red white).
Keep the key J held down to access the settingsY NR (Noise Reduction): alleviates fuzziness
hidden at the bottom of the screen.(snowy picture).This setting is useful when
O Once the necessary adjustments have beenreception is difficult
made, select the option STORE and press L
to store them.
� To exit from the menus, press R.
Rotating the picture(only available on certain versions)
Larger screens are sensitive to variations inThe FEATURES menu appears.
the earth's magnetic field.This setting makes itO Use J key to select ROTATION and use
possible to compensate for this phenomenon.K Lkeys to alter the angle of the image.
& Press H.� Press R to exit from the menus.
Ž Select FEATURES (J) and press L.
EasyLink function
If the set is connected (by the EXT2 socket)
& Press H key.
to a video equipped with the EasyLinkŽ Select OPTIONS (J) and press L.The
function, the language, country and channels
OPTIONS menu is displayed.
found are automatically transmitted to theO Use J key to select EASY LINK and press L
video recorder at the time of installation.
to set it to ON. If your video recorder is not
A message is displayed on-screen duringequipped with this function, set to OFF.
loading.The list of video recorder channels is
� Press R to exit the menus.
then the same as those of the set.The EASY LINK setting is set to ON by default.
You must first check in the menus that the
Easylink function is activated:
7 |
ACEC
