315 2158.3 (16X24) 09-07-2003 16:50 Pagina 18
AV3/AV4 Digital High Definition input
Connect the equipment with 2 Fh RGB output to
YRGB Y
the RGB connector and to the L and R AUDIO
AUDIOAUDIO
PbLPbLjacks of AV3.
Connect the equipment with 2Fh YPbPr output to
PrRPrR
the Y,Pb and Pr jacks and to the L and R AUDIO
VIDEO 2Fh
480p/1080ijacks of AV4.
AV 4AV 3See also the manual of your High Definition
ININ
equipment.
AV3/AV4 input connectors will accept theInputs AV3 and AV4 also allow horizontal and
following signals from HD set top box (HD-STB)vertical picture shift using the remote control
decoders and progressive scan DVD players:cursor left/right, up/down.
ED 480p31.470 kHz60 HzNote:
- 60 Hz normally refers to USA markets and 50 Hz to
HD 1080i33.750 kHz60 Hz
UK,Europe and Australian markets.
HD 576p31.250 kHz50 Hz
- The AV3 RGB (D-15) connector will accept only the
AV3/AV4 input connectors also accept the followingsignal standards 480p/60 Hz,1080i/50 Hz and
1250 line HD display formats (available on selected1152i/50 Hz and is only for TV standards.
HD-STB decoders) as detailed in the Australian DTVIt is not a PC connector.
Receiver Standards:
Warning:in case you notice scrolling images,wrong
HD 1152i (1250) 31.250 kHz50 Hzcolours or no colour,no picture,or even combinations of
these on your screen,check if the connections are done
HD 1080i (1250) 31.250 kHz50 Hz
in the right way.
Side connections
Headphone
& Insert the plug into the headphone socket L
at the right side of the TV.
é Press ? on the remote control to switch off
L
the internal loudspeakers of the TV.
AUDIO
The headphone impedance must be between 8
VIDEO
and 4000 Ohm.The headphone socket has a 3.5
SYVIDEO
mm jack.
1
2In the SOUND menu select Headphone
3
volumeto adjust the headphone volume.
& Connect your camera or camcorder to sockets
at the right side of your TV.
é Connect the equipment to VIDEO 2 and
AUDIO L3for mono equipment.For stereo
equipment also connect AUDIO R 3.
S-Video quality with an S-VHS, Hi-8 or Digital
camcorder is obtained by connecting the
S-Video cables with the S-VIDEO input 1
(instead of VIDEO 2) and AUDIO inputs
3.
Note:If you prefer,you can also connect the
camcorder to one of the TVOs rear AV IN jacks.
18Connect Peripheral equipment |