2355.4 en 02-11-2004 14:19 Pagina 16
TipsBefore Calling Service
SymptomsItems to Check and Actions to follow
?Ghost? orY This may be caused by obstruction to the antenna due to high rise buildings or hills.
double imagesUsing a highly directional antenna may improve the picture.
No powerY Check that the TVOs AC power cord is plugged into the mains socket.
Y Unplug the television, wait for 60 seconds.
The re-insert plug into the mains socket and turn on the television again.
No pictureY Check antenna connections at the bottom of the TV to see if it properly connected
to the TV.
YPossible broadcast station trouble.Try another channel.
Y Adjust the contrast and brightness settings.Try another auto picture setting.
Y Check the Closed Captions control. Some TEXT modes could block the screen.
Y Switch your HDMI-source to a correct display mode.
No picture andYYour TV has a protective mode in case there is too much heat build-up.
power switched onCheck the clearance around the vents of the device to be certain there are no
blocking walls or cabinets which would limit the air flow.
No soundY Increase the VOLUME.
Y Check that the TV is not muted, press the ? button on the remote control.
Y When no signal is detected, the TV automatically switches off the sound.
This is proper operation and does not indicate a malfunction.
Good sound butY Adjust the contrast, color, tint and brightness setting.
poor color orTry another auto picture setting.
no picture
Poor pictureY Check the HDMI connection.
Snowish pictureY Check the antenna connection.
and noise
Television notY Check whether the batteries are working. Replace if necessary.
responding toY Clean the remote control sensor lens on the TV.
remote controlY Operating range between TV and the remote control should not be > 240�.
YYou can still use the buttons on the top side of your TV.
Y Check if the remote control is in the correct mode.
Control ofY The infrared signals of the screen may influence the reception sensibility of
accessory devicesother peripherals.
Solution: replace the batteries of the remote control of other devices.
E.g. keep away a wireless headphone from within a radius of 50�.
No stable or notCheck if you have selected the correct VGA mode in your PC.
synchronized VGA
picture
PowerYour TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution. Power consumption: 2 W.
MiscellaneousY Ambient temperature: +5~ +40!C
Y Mains: 50/60 Hz - Auto voltage ranging from 96 to 140V.
YPower consumption: around 160W
Y Standby consumption: < 2 W
YWeight (excl. packaging): 30PF9946: 40 Lbs; 37PF9946: 66 Lbs; 42PF9946: 92 Lbs
Y Dimensions (wxhxd):
30PF9946: 895 x 490 x 110
37PF9946: 1130 x 600 x 85
42PF9946: 1215 x 660 x 90
16 |
ACEC
