2377.1 en 13-07-2004 13:01 Pagina 6
Recorder (VCR-DVD+RW)
Note:Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display.Keep a minimum distance of 20from the screen.
&Connect the RF Antenna cable 1to the RF INsocket
AV2MON.OUT
of your recorder.
VIDEO/AUDIO S-VIDEO VIDEO/AUDIOx ANTENNA
RéConnect another RF cable 2from the output OUTof
your recorder to the TVs input xANTENNA jack.
ŤConnect the supplied adaptor cable mini-jack to cinch
CABLE
3 to the VIDEO/AUDIO input jack of AV2.
4
3If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
4 with the S-VIDEO input.
INOUTS-VHS does not provide audio, so the mini-jack to cinch
cable must still be connected to provide sound.
RECORDER
Recorder and other A/V devices&Connect the RF Antenna 1to the RF INsocket of
your other A/V device.
AV2 MON.OUT
éConnect the supplied adaptor cable mini-jack to cinch
VIDEO/AUDIO S-VIDEOVIDEO/AUDIOx ANTENNA
2 to the VIDEO/AUDIO input jack of AV2.
R
ŤConnect the RF output of the A/V device to the RF
input on the recorder 3.
CABLE
ŹConnect another RF cable 4from the output OUTof
4your recorder to the TVs input x ANTENNA jack.
If your recorder has an S-VHS video jack,see above.
OUTINTheMON.OUT connector can be used for a daisy
xTV
chaining or to record programmes from your TV.
3Only when a recorder is connected to MON.OUT it is
RECORDERpossible to record a programme from other devices
connected to the TV.
See Record with your recorder, p. 13.
Devices with Component Video Output Connectors (YPbPr)
AV1(1Fh)&Connect the three separate component video cables 1
PrPbYto the device having component video outputs (YPbPr),
such as DVD-players, laser-disc players, videogame
RLCVBSplayers, satellite receivers, or other equipment and to
AUDIOtheY,Pb andPr jacks of AV1(1Fh) on the TV.
VIDEOVIDEOéConnect the audio cable to the devices AUDIO Land R
L/MonoMonoL/
AUDIOAUDIOjacks and to the L andR audioYPbPr jacks of AV1.
ŤFor reproduction of CVI (Component Video Input) also
12connect to the CVBS jack of AV1. See the handbook of
your DVD player.
Note:the labels for the component video sockets may differ
depending on the DVD player or the device connected.
Although the abbreviations may vary the letters B and R
stand for blue and red component signals,respectively,and Y
indicates the luminance signal.Refer to the DVD players or
devices instructions for use for definitions and connection
details.
DVD
6 |
ACEC
