RECORDING
English
Start autostart recording
Autostart recording
1 To start recording, press PLAY on the selected source.
OPEN / CLOSEOPEN / CLOSEPLAPLAY / PY / PAUSEAUSESTOPREC� The CD recorder automatically starts to record and dSTOPTYPERECORDSTORE/MENUSTORE/MENU
FINALIZEERASESOURCEEASY JOGEASY JOGCANCEL/DELETE
DISPLAYlights continuously.
AUDIO CD RECORDABLE/REWRITAUDIO CD RECORDABLE/REWRITABLEABLERecordable
Y If, however, you start the source during a track, recording
ENTER
PHONESINFRA REDINFRA REDPHONES
ON / OFFstarts at the beginning of the next track or after 2.7 seconds
of silence in analog recordings.
Y To check the elapsed recording time, press DISPLAY. (This
This feature enables you to make fast and easy recordings of
can also be done during recording)
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
Y The EASY JOG/ENTER key can be used to adjust the
In analog source material a silence of 2.7 seconds or more is
recording level.
automatically detected as a track increment.
Y The recorder stops automatically.
Important:
- Recording from CD-changers should always be started in the
2 To stop recording manually, press STOP on the CD recorder.
RECORD DISC, RECORD TRACK or MAKE CD mode.
� UPDATE lights up and SYNC and d go out.
Preparing for autostart recording
Y If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
1 Make sure the disc is absolutely free of scratches and dust
particles.
Y To interrupt recording, press PAUSE on the CD recorder.
� d starts to flash. (Autostart recording is disabled.) To
2 Press SOURCE repeatedly until (depending on the
resume, press RECORD on the CD recorder.
connection used):
� DIGITAL I, OPTICAL I or ANALOG lights up and
After recording the display will show UPDATE for several
DIGITAL 1, OPTICAL or ANALOG appears on the
seconds.
display.
REMTIME TRACKTOTAL REM TRACK TIMESTEP
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
SYNCMANUALRECORDPROG
DIGITALICDSHUFFLEALL- Auto track is always active.
IRWREPEATOPTICAL
ANALOGSCAN TRACK
Important:
3 With the CD recorder stopped, press REC TYPE
If you want to play the recorded CDR disc on any
once:to select �RECORD DISCO;
regular CD player, it must first be finalized. See
twice:to select �RECORD TRACKO;
finalizing discs.
four times:to select �MAKE CDO. (Active for digital
recordings.)
Finalized CDRW discs play only on CDRW compatible
� d and SYNC start to flash and the display shows the
CD players.
selection.
REMTIME TRACKTOTAL REMTRACK TIMESTEP
SYNCMANUALRECORDPROG
DIGITALICDSHUFFLEALL
OPTICALIRWREPEAT
ANALOGSCANTRACK
Y If input label (DIGITAL I) flashes, the digital connection is
incorrect.
16 |
ACEC
