xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 30
Troubleshooting
English
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Do not open the set as there is a risk of electric shock.
If a fault occurs,Å¢rst check the points listed,before taking the set for
repair.If you are unable to solve a problem by following these hints,
consult your dealer or service center.
Laser safety
This unit employs a laser.Only a qualiŢed service person should remove
the cover or attempt to service this device,due to possible eye injury.
ProblemSolution
No power� ensure that the ON/OFF button is on: the set is in standby mode, press any
key to activate it
� ensure that the power cord is plugged in correctly
No sound� check the audio connections
� try using a different source on the ampliŢer
Remote control does not work� Ţrst select the right source on the remote control
� point the remote control directly at the set
Will not record� clean the disc
� check if CDR(W) is an unŢnalized disc
� check that the disc is recordable and replace if necessary
� the disc is not an AUDIO disc (WRONG DISC)
Recording is distorted� make sure the recording level is correct
Recorded tracks do not start or stop� try another auto track setting
at the correct time or tracks have been� check if there are at least 2.7 seconds silence in between the tracks
merged together(analog recording only)
� insert track increments manually with the remote control
20 second pause between recordings� see ORecording with automatic startO.
Recorded disc does not play� Ţnalize the CDR(W)
in other standard CD player� insert the CDRW in a CDRW compatible player
Stops during recording� use Philips audio CDR(W)s.
� in case recording process is interrupted (power loss, mechanical shock), start
recording again with a new disc
Missing directories on MP3-CD� only albums with playable Ţles will be shown
Insert Disc indication� replace or clean the disc
� insert a CD(RW), label upwards
� wait until the lens has cleared
Use Audio CD indication� insert a digital audio disc marked with ODigital audio� and the special logo
Check Input indication� select the correct input
� make sure the digital source is switched on
� make sure the connection cord is properly connected
Unexpected start of Demo mode� keep STOP 9 on the set pressed for at least 5 seconds to cancel Demo
(automatic display of recorder features)mode permanently
Set does not react� unplug the set, then replug it
30 |