8. Alternatively, if you do not know the number of the channel you want to record, you can
choose from the channel list by pressing the GREEN button as indicated. The channel list
will then be displayed. Use the UP and DOWN arrow buttons to find the channel you require
and press the SELECT button. The channel number will then be added to the Oset the timer�
screen.
9. Press the DOWN arrow button to confirm the entry and move to the start time line.
10. Use the number buttons to enter the time when you want the receiver to switch on,
preferably several minutes before you set your video recorder to start recording. Your
receiver uses a 24 hour clock, so for example to switch on at 8.25pm, you should enter
2025. If you enter something incorrectlyLEFT and , the RIGHT arrow buttons can be used to
overtype the entry.
11. Press the DOWN arrow button to confirm the entry and move to the next line.
12. Now enter the time you want your receiver to switch off, preferably after your video will have
stopped recording. Again, you should enter 4 digits and in the 24 hour format. Press the
DOWN arrow button to confirm the entry and move to the next line.
13. Use the LEFT and RIGHT arrow buttons to select the required recording frequency. The
screen display will give you options of ONCE ONLY, DAILSelect Y or WEEKLthe 1st optionY.
to record only once. Select the 2nd option if you want the receiver to record at these times
every day, and select the 3rd option to record at that time on a weekly basis.
14. With all the details entered, press the SELECT button to confirm the settings and return to
previous menu to check them, then press EXIT to return to normal mode or repeat from step
4 for additional timer setting.
If you have finished watching programmes on your digital receiver, you must leave your receiver
in standby mode in order for the timer settings to be activated. Once the timer is active the
message �rEC� is shown on the front panel display.
THESE STEPS WILL NOW ACTIVATE YOUR DIGITAL RECEIVER, PLEASE REMEMBER YOU
STILL NEED TO PROGRAM YOUR VIDEO RECORDER !
TIMER ALARM
If after setting the timer you wish to continue watching other digital a timer, you can do so by
changing channels in the normal way. If you are watching another digital channel when the timer
is due to start the timer alarm will sound and OrEd� will be shown on the front display. Press the
RED button on your remote to display the following screen.
You have two choices, whether to change to the channel set in the timer or continue to watch the
current channel.
- To change to the channel set in the timerSELECT , press the button. In this case the
digital receiver will not go into standby at the end of the timer.
- To continue watching the current channel, press the RED button again.
22 |
ACEC
