Preparation
English
NTSC/PAL ConversionSwitching On
This player is equipped with an NTSC/PAL1Connect the AC power cord to the power
conversion feature that converts the videooutlet.
output of the disc to match your TV system.2Switch on the TV and DVD player.
Allows you to select between PAL, NTSC and3Set the TV to the correct Video IN channel. (eg.
MULTI mode.EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc.
The conversions supported are as follows:(Refer to your TV ownerOs manual for detail)
� The player display lights up and the default
DiscOutput format
TypeFormatSelected modescreen appears on the TV.
NTSCPALAUTO
4If you are using an external equipment (eg. audio
DVDNTSCNTSCPALNTSC
PALNotSupportedPALPALsystem or receiver), turn them on and select the
VCDNTSCNTSCPALNTSCappropriate input source that was used to
PALNTSCPALPALconnect to the DVD player output. Refer to the
equipment ownerOs manual for detail.
1Press VIDEO SYS on the remote control to
access the preference video standard.
Notes:TV OUTS-VIDEO VIDEOCOAXIAL OPTICALFLSLCenterMulti-5.1
FRSRSub-W
- If you have a PAL only TV, ensure that your12V
PAL/NTSC setting is PAL.
- MULTI can only be selected when using a TV
that has both the NTSC and PAL systems.
- This setting is applicable for CVBS output on
cinch and SCART only.12V ADAPTOR
- Slight picture distortions may occur due to this
conversion. This is normal. Thus, the MULTI format
is most suitable for the best picture quality.
ACMAINS
AC power cord
5If you want to see the On Screen Display in your
preferred language, press the System Menu
button and with the arrow keys and OK go to
GENERAL SETUP then OSD LANG to select
the desired language.
14 |
ACEC
