Preparation
If your TV has a CVBS Video input
Basic Connections
connector,
Please refer to the instruction books of your TV,
1Connect the CVBS VIDEO OUT on the DVD
VCR, Stereo System or other devices as
player to the CVBS VIDEO IN on the TV.English
necessary to make the best connections.
2Connect the Left and Right AUDIO OUT on the
Make one of the following connections,
DVD player to the Left and Right AUDIO IN on
depending on the capabilities of your existing
the TV.
equipment.
The following guidelines are options for the best
picture and sound quality available on your DVD
player.
TO TV
VCR
Picture
1Use the CVBS Video Ouput for good picture
quality.
2Use SCART Output for best picture quality.
OR
TO SCART INTO VIDEO INTO AUDIO IN
Sound
1Digital audio connections provide the clearest
sound. Connect the DVD playerOs DIGITALPCM-MPEG2-Dolby DigitalDIGITAL AUDIO OUT
AUDIO OUT (COAXIAL) to your amplifier orCOAXIALTV OUTAUDIO OUTRLVIDEO OUT(CVBS)
receiver.
2If digital connections are not possible, connect
the DVD playerOs red and white AUDIO OUT to
your amplifier, receiver, stereo or TV.Connecting to an Audio System
1You can also listen to the sound of audio CDs
Warning!
and DVD video discs by connecting to an
� Never make or change connectionsoptional stereo system.
with the power switched on.
2Connect the Left and Right AUDIO OUT on the
� Connect the DVD player directly to
DVD player to the Left and Right AUDIO IN on
your TV, instead of eg. a VCR, to avoid
the stereo system.
distortion because DVD video discs are
copy protected.
AUDIO SYSTEM
� Do not connect the DVD player AUDIO
OUT to PHONO IN of your amplifier or
receiver.
Connecting to a TV
1Connect the SCART (TV OUT) to theTO SCART INORTO VIDEO IN
TO AUDIO IN
corresponding connector on the TV IN.
Note:
� Ensure that the OTV� indication on SCART
cable is connected to the TV set and ODVD�PCM-MPEG2-Dolby DigitalDIGITAL AUDIO OUT
indication on SCART cable is connected to theCOAXIALTV OUTRL(CVBS)AUDIO OUT VIDEO OUT
DVD player.
If your TV is not equipped with a SCART input,
you can select the following connection:
9 |