Preparation
General notes
- Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Possible connections are
shown in the following drawings.
- Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.
- For better sound reproduction, connect the playerOs audio out jacks to the
audio in jacks of your amplifier, receiver, stereo or A/V equipment. See
�Connecting to optional equipmentO.
Caution: Do not connect the playerOs audio out jack to the phono
in jack of your audio system.
Connecting to a TV
TV
Connect the SCART to the corresponding connector on the TV using the
SCART cable supplied (A).
If your TV is not equipped with a SCART you can select one of the following
alternative connections:
DCA
Video CVBS connection
1Connect the Video out (CVBS) jack to the video in jack on the TV using
the video cable supplied (C).
AUX/VCRI2Connect the audio Left and Right out jacks to the audio left/right in jacksIN
DIGITAL AUDIO OUTPCM/MPEG2/AC3/DTSSTEREO OUT
on the TV (D).
MAINSTV OUTIIRL(CVBS)
DIG OUTAUDIO OUTVIDEO OUT
Connecting to optional equipment
Connecting to an amplifier equipped with two channel
analog stereo or Dolby Surround
Connect the audio Left and Right out jacks of the DVD player to the
audio left and right in jack on your amplifier, receiver or stereo system,
using an audio cable (E).
All
Connecting to an amplifier equipped with two channel
digital stereo (PCM)
1Connect the playerOs digital audio out jack (coaxial F) to the
corresponding in jack on your amplifier.
Use an optional digital coaxial cable.
2You will need to activate the playerOs digital output (see �Personal
PreferencesO).
14PREPARATION |
ACEC
