Preparation
General notes
- Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player. Possible
connections are shown in the following drawings.
Please refer to the manuals of your TV,VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR.The video
quality could be distorted by the copy protection system.
- For better sound reproduction, connect the playerOs audio out jacks
to the audio in jacks of your amplifier, receiver, stereo or A/V
equipment. See �Connecting to optional equipmentO.
Caution: Do not connect the playerOs audio out jack to the
phono in jack of your audio system.
Connecting to a TV
S-Video connection.
1Connect the S-Video connector on the rear of the player to the
corresponding connector on the TV using the S-Video cable (not
supplied).
2Connect the audio Left and Right channel sockets on the player rear
TV
PCM/MPEG2/AC3/DTS11DIGITAL AUDIO OUT
panel to the corresponding sockets on your TV or stereo system (e.g.
22
CVBSVIDEO OUT
COAXIALRAUDIOLS-VIDEO OUTY/CAUX, CD, etc.).
S-VIDEO CABLE
Video CVBS connection
1Connect the Video socket on the rear of the player to the
VIDEOAUDIO
ININcorresponding socket on the TV using the cable supplied.
TV
2 Connect the audio Left and Right channel sockets on the rear of the
player to the corresponding sockets on the TV using the cable supplied.
PCM/MPEG2/AC3/DTS1DIGITAL AUDIO OUT1Alternatively, you can use the same cable to connect the audio Left and
22
CVBSY/CRight sockets on the rear of the player to the corresponding sockets onRL
COAXIALAUDIOVIDEO OUTS-VIDEO OUT
your TV or stereo system (e.g.AUX, CD, etc.).
A/V CABLE
14 PREPARATION |
ACEC
