Hookups (contOd) 13
Connecting to a TV Only
TV has Component Video In Jacks (red,green,and blue)
Back of TV
(example only)
1
Pr/CrPb/CbLEFT AUDIO INRIGHT AUDIO IN
Y
Pr/CrRIGHT AUDIO IN
Pb/CbLEFT AUDIO IN
Y
2
3
Connect the DVD PlayerOs Y Pb Pr (VIDEO OUT) jacks to
the corresponding COMPONENT VIDEO IN jacks on the
1
TV. Use component video cables (not supplied).The Component
Video jacks are red, green, and blue.
On your TV, you may have additional Component Video In jacks that
are specifically labelled Progressive Scan. If you use these instead, set
PROGRESSIVE to ON at the Player. (See step 5.)
Connect the DVD PlayerOs red and white AUDIO OUT (left
and right) jacks to the left/right AUDIO IN jacks on the TV.
2
Use the supplied audio cables, which have red and white markings.
Match the cable colors to the jack colors.
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON yy on the front of
3
the DVD Player to turn it on.
Helpful Hint
Turn on the TV. Set it to the correct Component Video InOn the TV,the component video
Y
channel. See your TV ownerOs manual for details. Or, go to yourin jacks may be labeled YUV or
4
lowest TV channel (01 or 02) and change channels downward untilPr/Cr Pb/Cb Y and may be
you see the DVD screen on the TV.green,blue,and red.
Y If your TV has a single Audio In
If your TV has Progressive Scan, set PROGRESSIVE to ONjack instead of separate
at the DVD Player. Details are on page 38.left/right Audio In jacks,you will
5
Select Progressive Scan at your TV also if necessary. See your TVneed a different audio cable.
ownerOs manual for details.You need a Osplitter�audio
cable to go from the left/right
AUDIO OUT jacks of the DVD
Player to the single Audio In
jack on your TV.See your
electronics retailer for details. |
ACEC
