Getting Started
EnglishStep 2: Setting up the TVSelecting the colour system that
corresponds to your TVIMPORTANT!
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD discMake sure you have completed all
to play on this Player, the colour system ofthe necessary connections. (See
pages 8-9 OConnecting TV�).
the Disc, the TV and the DVD Player
1Turn on the TV and set to the correctshould match.
video-in channel. You should see the blue
Philips DVD background screen on the
TV.
2Usually these channels are between the
lowest and highest channels and may be
called FRONT, A/V IN, or VIDEO. See your
TV manual for more details.
� Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
1Stop playback and press SYSTEM MENU.channel.
� Or, the TV Remote Control may have a2Press 4 3 to select �Video SetupO page.
3Enter its submenu by pressing OK.button or switch that chooses different
video modes.
� Or, set the TV to channel 3 or 4 if you4Use the 1 2 3 4 keys on the Remote
are using an RF modulator.Control to navigate in the menu.
3If you are using external equipment, (eg.Move to �TV TypeO and press 2.
PAL � Select this if the connected TV isaudio system or receiver), turn it on and
PAL system. It will change the video signalselect the appropriate input source for
of a NTSC disc and output in PAL format.the DVD Player output. Refer to the
equipment ownerOs manual for detail.
NTSC � Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi � Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5Select an item and press OK.
6Press 1 to return to �Video SetupO page.
To remove the menu
Press SYSTEM MENU.
14 |
ACEC
