H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 12
12 Hookups (contOd)
DVD/VCR to a TV that has Component Video In jacks
DVD/VCRVCRDVD
AUDIO OUTAUDIO INS-VIDEOANT-INOUT COMPONENTVIDEO OUTAUDIOOUTDIGITAL AUDIO OUT
LLY
RRPCb/bL
1ANT-OUTVIDEO OUTVIDEO INPROGRESSIVECOAXIALIPPCr/r
R
Antenna or
Cable TV
Signal
COMPONENT
32AUDIO INVIDEO IN
Y
L
Cb/Pb
R
Cr/Pr
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
1
Connect the supplied red and white audio cables to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
2
and white AUDIO IN jacks on the TV. Match the cable colors to the jack
colors.
Connect component video cable (not supplied) to the COMPO-
NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO-
3
NENT VIDEO IN jacks on the TV. The Component Video In jacks on the
TV are usually red, blue, and green.
The Component Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR.Therefore,in order to use the VCR features or view TV channels at the
DVD/VCR,you still need to either connect the RF coaxial cable between the ANT-OUT
jack of the DVD/VCR and the TVOs Antenna In jack,or connect the yellow video cable.
To connect the supplied RF coaxial cable,see step 2 on page eight.To connect the
supplied yellow video cable,see step 3 on page 11.
If your TV is compatible with progressive scanning (480p),connect the TV to the
Component Video Output jacks of the DVD player,and make sure INTERLACE/PRO-
GRESSIVE SCAN SELECTOR is set to PROGRESSIVE (P).
Connect the power cords of the DVD/VCR and TV to a power outlet.
Turn on the TV and set it to the Component Video In channel for
4
DVD Player features.
If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4
at the TV. If you are using the yellow video cable for VCR playback, choose the
Video In channel at your TV.
Go to your lowest TV channel and change channels down until you see VCR or
DVD playback on the TV screen, or try channel 3 or 4 at the TV.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD
Video logo will appear on the TV screen when you get the TV on the correct
Component Video In channel.
You are ready to turn on the DVD/VCR. Go to page 17 before turn-
ing on the DVD/VCR.
5
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD PlayerOs Setup menu. Details are
6
on page 72.If you play a DVD when the settings are wrong, the sound will be
distorted or you may damage the TV speakers. |
ACEC
