Preparation
General Notes
? Depending on your TV and other equipment you wish to
connect, there are various ways you could connect theEnglish
player. Use only one of the connections described below.
? Please refer to the manuals of your TV, VCR, Stereo SystemTV
or other devices as necessary to make the best
connections.
? For better sound reproduction, connect the playerOs audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See �Connecting to
Optional EquipmentO.
AXZY
Caution:
� Make sure the DVD player is connected directly
to the TV. Set the TV to the correct video input
channel.
� Do not connect the playerOs audio out jack toIII
SURROUND CENTERFRONTTV OUTAUX/VCR
the phono in jack of your audio system.DIGITAL AUDIO OUTPCM/MPEG2/AC-3/DTSINLL1
RR2
� Do not connect your DVD player to the TV via
COAXIALOPTICALSURROUND SUB WFFRONTMULTICHANNEL AUDIO OUTAUDIOOUTCVBSPr/CrVIDEO OUTPb/CbYS-VIDEO
your VCR. The DVD image could be distorted by
the copy protection system.
Connecting to a TVComponent Video (Pr/Cr Pb/Cb Y)
connection
? Make one of the following connections, depending on the
capabilities of your existing equipment.1Connect either S-Video or CVBS video out jack to TV as
above diagram.
SCART connection2Turn on the TV and go to Personal Preference menu (see
Personal Preference).
1Connect the SCART to the corresponding connector on
3Select the video output from RGB (default) to Pr/Cr Pb/Cb Y.
the TV using the SCART cable supplied (Z).
4Connect the Pr/Cr Pb/Cb Y VIDEO OUT jacks on the DVD
If your TV is not equipped with a SCART you can select
player to the corresponding in jacks on the TV using an
one of the following alternative connections:
optional Pr/Cr Pb/Cb Y cable (W).
5Connect the Left and Right AUDIO OUT jacks of the DVD
S-Video (Y/C) connection
player to the audio left/right in jacks on the TV (A).
1Connect the Y/C S-VIDEO OUT jack on the DVD player to
the S-Video in jack on the TV using an optional S-Video
cable (Y).TV
2Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV (A).
CVBS connection
1Connect the (CVBS) VIDEO OUT jack on the DVD player
to the video in jack on the TV using the video cable
supplied (X).
2Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV (A).AW
II
SURROUND CENTERFRONTTV OUT
DIGITAL AUDIO OUTPCM/MPEG2/AC-3/DTSLL1
RR2
COAXIALOPTICALSURROUND SUB WF FRONTMULTICHANNEL AUDIO OUTAUDIOOUTCVBSPr/CrVIDEO OUTPb/CbYS-VIDEO
PREPARATION9 |
ACEC
