Getting Started
Step 1: Inserting BatteriesStep 2: Setting the TV
English31Connect the power cable from the DVD
recorderOs ~ MAINS to the power
1supply.
2
2Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
� Usually this channel is between the
1Open the battery compartment.
lowest and highest channels and may be
2Insert two batteries type R06 or AA,called FRONT, A/V IN, VIDEO. See your
following the indications (+-) insideTVOs manual for more details.
the compartment.� Or, you may go to channel 1 on your
TV, then press the Channel down button
3Close the cover.
repeatedly until you see the Video In
CAUTION!channel.
� Or, the TV remote control may have a
- Remove batteries if they arebutton or switch that chooses different
exhausted or if the remote is not to
be used for a long time.video modes.
- Do not use old and new or� Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
different types of batteries in
combination.IMPORTANT!
- Batteries contain chemical
substances, so they should beWhen you complete the
disposed of properly.connections and turn on the DVD
recorder for the first time, it is
advisable that you make several
Using the remote control tobasic settings.
operate the system
Please see the following pages on
using the System Menu features
to program TV channels and menu
language settings. This will improve
the performance of this DVD
recorder considerably.
1Aim the remote control directly at the
remote sensor (iR) on the front panel.
2Press REC SOURCE button on the
remote control to select the mode you
wish to control (for example TUNER,
Front-CVBS.)
3Then select the desired function (for
example S, T.)
23
001_033_dvdr3355_37A_eng52321/3/05, 3:17 PM |
ACEC
