Troubleshooting (continued)
English
Problem (Recording) Solution
Recordings are not occurring The TV channel you want to record is not stored or you
as scheduled. New recordings selected the wrong program number. Check the TV channels
cannot be made.stored.
You have to reset the timer recording after adjusting the clock
setting.
You cannot use the recorder to duplicate copy-protected
materials (DVDs or videotapes) onto a DVD recordable disc.
The hard disk could be full. Delete some titles to create space
for new recordings.
The wrong TV channel was 1) Enter the G-CODE? programming number of the desired TV
decoded (recorded) after you channel.
programmed a recording 2) Press OK to con
?
using the G-CODE system.3) Check the channel number in the {Program #} input
does not correspond to the desired TV channel, select this
entry
4) Press OK to con
Picture is fuzzy and This happens if you try to copy DVDs or video cassettes that
brightness varies when have been copy-protected. Even though the picture on the TV is
copying DVD Video discs or
prerecorded video cassettes. This interference is unavoidable with copy-protected DVDs or
video cassettes.
The recordable DVD disc has a limited recording lifetime, please
change a new disc for recording.
The message This will clear The requested action requires that the time shift buffer
the time shift buffer appears.(temporary HDD storage) to be cleared. All contents that were
not marked for recording will be deleted.
There is a power failure You have to reselect the { Delete HDD } option and delete the
during the deleting of the HDD contents again.
recorders HDD contents.
There is a power failure The titles that were previously recorded will be deleted and the
during the copying of
a DVDR disc.used as a normal blank disc. You have to re-copy the
disc again.
During recording from the Parts of the signal may be copy-protected by the broadcaster.
time shift buffer, it is not This portion of the time shift video bar will be shown in a
possible to start or stop a different color. You can only start or stop a recording if the
recording.selected portion does not contain any copyright content.
Use WX keys or a á keys to navigate to a non-protected
portion and press REC to start a recording. To end a recording,
press STOP.
Press SELECT to clear a recording at any time.
72 |
ACEC
