Getting Started
Setting up Progressive Scan feature
ACTIVATING PROGRESSIVE SCAN:
(for Progressive Scan TV only)1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.The progressive scan display twice the
English
number of frames per seconds thanOKCancel
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher8Press 1 to highlight OK in the menu
picture resolution and quality.and press OK to confirm.
IMPORTANT!There will be a distorted picture on
Before enabling the progressive scanyour TV at this state until you turn
feature, you must ensure:on the progressive scan mode on
1) Your TV can accept progressive signals,your TV.
a progressive scan TV is required.
9Turn on your TV progressive scan mode
2) You have connected the DVD player to
(refer to your TV user manual.)
your TV using Y Pb Pr (see page 9.)
� The below menu appears on the TV.
1Turn on your TV.
2Turn off your TV progressive scan modeCONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
or turn on interlaced mode (refer to yourPRESS OK BUTTON ON REMOTE.
TV user manual.)OKCancel
3Press POWER (B) on the remote
control to turn on the DVD player.OK
0Press 1 to highlight in the menu
4Select the correct Video Input channel.and press OK to confirm.
(See page 14).� The set up is complete now and you
� The DVD background screen appearscan start enjoy the high quality picture.
on the TV.
To deactivate Progressive manually:
5Press SETUP.
Wait for 15 seconds for auto recovery.
6Press 2 to select {VIDEO SETUP PAGE}.
OR
1Press OPEN CLOSE 0 on the DVD
GeneralAudioVideoPreference
player to open the disc tray.
- - Video Setup Page - -
TY Type2Press numeric keypad �1O on the
TV Displayremote control for few seconds.
Progressive On
� The DVD background screen appears
Sharpness Off
Brightnesson the TV.
Contrast
ColorHelpful Hint:
� There are some progressive scan TV and
High-Definition TV sets that are not fully
7Select {PROGRESSIVE} to {ON}, then OKcompatible with this DVD system, resulting in
to confirm.the unnatural picture when playing back a
� The instruction menu appears on theDVD VIDEO disc in the progressive scan
TV.mode. In such a case, turn off the
progressive scan feature on both the DVD
player and your TV set.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
15
01-35_DVP3020_55_Eng_RC21528/06/06, 1:24 PM |
ACEC
