Operation with tape (Continued)
Press REPEAT A-B if you wish to record in Long Play
Instant Timer Recording (ITR)5or Standard Play.
Your VCR allows you to make recordings using a varietySP will produce improved picture and sound quality,
of simple methods:however LP will provide twice as much recording time
Instant Timer Recording (ITR) start recordingas SP.
immediately for a set period of time or until the video
Note
cassette runs out.Before pressing REPEAT A-B button, do the following
steps:
Your DVD+VCR incorporates Long Play (LP) which
1. Set the remote control to DVD mode by pressing
enables you to record up to twice the amount of time onODVD� on the remote control.
a video cassette. For example an E-180 will record up to
2. Set the DVD+VCR combi in VCR mode by pressing
180 minutes using Standard Play (SP); using LP you will bethe OSOURCE� button in the front panel until the
able to record up to 360 minutes. Please note there willdisplay window shows OVCR�.
be a slight loss in picture and sound quality when using LP.
Press RECORD on the remote to start recording.
Make sure that you have correctly connected your VCR6RECORD will appear on the TV screen.
1as described earlier in this book.Press RECORD on your unit or press RECORD on
Press 11 to turn on your VCR.the remote several times. Each successive press will
increase the record time by 30 minutes until you reach
Insert a video cassette with protection tab into youra maximum of 9 hours.
2VCR.
The video cassette should have the window side facing
Press PAUSE/STEP ; to avoid recording unwanted
up and the arrow facing away from you.7scenes.
Press PAUSE/STEP ; to continue recording.
Press 3 or 4 to select the programme number youIf you press PAUSE/STEP ; during ITR, the DVD/VCR
3wish to record.
You may also directly select programme number usingwill enter the record pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP will be
the numbered buttons on the remote control.
displayed when a tape is paused.After 5 minutes your
If you wish to record directly from the SCART or RCADVD+VCR will stop recording to
4sockets repeatedly press INPUT until the socket you
prevent damaging the tape or your DVD+VCR.
wish to record from is displayed.Press STOP to end recording.
8STOP will appear on the TV screen for a few seconds.
AV 1 for recording from EURO AV1 SCART socket on
the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket onNotes
the rear of your unit. If you do not wish to record on a tape (this can
AV 3 for recording from VIDEO IN and AUDIO IN happen quite easily by accident!) remove the
(Left & Right) sockets on the front of your unit.protection tab on the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole with
self adhesive tape.
Remember you can record one programme while
watching another by starting your instant recording, press
TV/VIDEO to appear TV indicator in the display
window and then selecting a different channel on your TV.
22 |
ACEC
