Getting Started
Setting up Progressive Scan feature
ACTIVATING PROGRESSIVE SCAN:
(for Progressive Scan TV only)1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
The progressive scan display twice the3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.English
number of frames per seconds thanOKCancel
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher8Press 1 to highlight OK in the menu and
picture resolution and quality.press OK to confirm.
There will be a distorted picture on
IMPORTANT!
your TV at this state until you turn
Before enabling the progressive scan
on the progressive scan mode on
feature, you must ensure:
your TV.
1) Your TV can accept progressive signals,
a progressive scan TV is required.9Turn on your TV progressive scan mode
2) You have connected the DVD player to(refer to your TV user manual.)
your TV using Y Pb Pr (see page 9).� The below menu appears on the TV.
1Turn on your TV.
2Turn off your TV progressive scan modeCONFIRM AGAIN TO USE PROGRESSIVESCAN. IF THE PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
or turn on interlaced mode (refer to your
TV user manual.)OKCancel
3Press POWER (B) on the remote
control to turn on the DVD player.0Press 1 to highlight OK in the menu and
press OK to confirm.
4Select the correct Video Input channel.
� The set up is complete now and you
(See page 16)
can start enjoy the high quality picture.
� The DVD background screen appears
on the TV.To deactivate Progressive manually:
5Press SETUP. Wait for 15 seconds for auto recovery.
OR
6Press 2 to select {VIDEO SETUP PAGE}.
1Press and hold EJECT 0 on the DVD
- - Video Setup Page - -player to open the disc tray.
TV Type
2When the disc is ejected, press and hold
TV Display
Progressive OnEJECT 0 again, and numeric keypad
Picture Setting Off
�1O on the remote control for few
HD JPEG
HDMI Setupseconds.
� The DVD background screen appears
Set Progressive TV Modeon the TV.
Helpful Hint:
7Select {PROGRESSIVE} to {ON}, then OK
- There are some progressive scan TV and
to confirm.
High-Definition TV sets that are not fully
� The instruction menu appears on the
compatible with this DVD system, resulting in
TV.
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the progressive
scan feature on both the DVD player and
your TV set.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
17
01-45 DVP5965K_55_eng31713/02/06, 4:03 PM |
ACEC
