Getting Started
English5Select an item and press OK.
Selecting the colour system that
� Follow the instructions shown on the
corresponds to your TV
TV to confirm the selection (if any).
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD discHelpful Hints:
to play on this Player, the colour system� Before changing the current TV
of the Disc, the TV and the DVD PlayerStandard setting, ensure that your TV
should match.supports the �selected TV TypeO system.
� If there is no proper picture on
- - Video Setup Page - -your TV, wait for 15 seconds for auto
recovery.
TV Type PAL
TV Display Multi
Progressive NTSCCHANGING PAL TO NTSC:
Picture Setting1. ENSURE THAT YOUR TV SUPPORTS
HD JPEG NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
HDMI Setup DISPLAYED ON THE TV, WAIT 15
SECONDS FOR AUTO RECOVERY.
OKCANCEL
NTSC TV
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
1Press SETUP.OKCANCEL
2Press 2 to select {VIDEO SETUP PAGE}.
3Press 3 4 to highlight {TV TYPE}, then
To reset to default TV colour system
press 2.
manually:
4Press 3 4 to highlight one of the options
Wait for 15 seconds for auto recovery.
below:
OR
PAL � Select this if the connected TV is
1Press and hold EJECT 0 on the DVD
PAL system. It will change the video signal
player to open the disc tray.
of a NTSC disc and output in PAL format.
2When the disc is ejected, press and hold
NTSC � Select this if the connected TVEJECT 0 again, and numeric keypad
is NTSC system. It will change the video�3O on the remote control for few
signal of a PAL disc and output in NTSCseconds.
format.� The DVD background screen appears
on the TV.
Multi � Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
18
01-45 DVP5965K_98_eng31813/02/06, 2:51 PM |
ACEC
