Getting Started
Step 1: Inserting batteries intoStep 2:Setting up the TV
the Remote ControlIMPORTANT!
3Make sure you have completed all
the necessary connections. (See
1pages 7-8 OConnecting TV�).
2
1Turn on the TV and set to the correct
video-in channel. You should see the blue
Philips DVD background screen on the
1Open the battery compartment.TV.
2Insert two batteries type R06 or AA,� Usually these channels are between the
following the indications (+-) insidelowest and highest channels and may be
the compartment.called FRONT, A/V IN, or VIDEO. See your
TV manual for more details.
3Close the cover.
� Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
Using the Remote Control to
channel.
operate the Player� Or, the TV Remote Control may have a
1Aim the Remotebutton or switch that chooses different
Control directly at thevideo modes.STOPPL
remote sensor (iR) on� Or, set the TV to channel 3 or 4 if you
the front panel.are using an RF modulator.
2Do not put any objects2If you are using external equipment, (eg.
audio system or receiver), turn it on and
between the Remote
Control and the DVDselect the appropriate input source for
Player while operatingthe DVD Player output. Refer to the
equipment ownerOs manual for detail.
the DVD Player.
To deactivate Progressive manually
The progressive scan display present 60
PREVIEWPREVIEW MUTEMUTEcomplete frames per seconds, rather than
30 frames per second of interlaced
CAUTION!scanning (ordinary normal TV system).
� Remove batteries if they are
exhausted or if the Remote ControlWith nearly double the number of line,
progressive scan offers higher picture
is not being used for a long time.resolution and eliminates bothersome
� Do not use old and new ormotion artifacts those jagged edge on
different types of batteries in
moving objects.
combination.
� Batteries contain chemicalTo enjoy the full quality potential offered
substances, so they should be
by progressive scan feature, a progressive
disposed properly.scan TV is required. To activate
progressive function, refer to �Progressive
on pages 28-29.
13
01-36 DVP630_EU_0511318/03/2004, 10:04 AM/05_8239 210 98393 |
ACEC
