8English
Crevice tool, small nozzle and small brush (specic types only)
1 Connect the crevice small tool, nozzle or small brush directly to the handgrip or to the tube.
Accessory clip (specic types only)
The accessory clip can simply be snapped onto the tube.
- The crevice tool and the small nozzle can be snapped onto the clip (Fig. 10).
Using the appliance
Vacuuming
1 Pull the cord out of the appliance and put the mains plug in the wall socket (Fig. 11).
2 Push the on/off button on top of the appliance with your foot to switch on the appliance.
3 The appliance can be carried in two ways:
- You can carry the vacuum cleaner vertically by the handle on the front of the appliance (Fig. 12).
- You can carry the vacuum cleaner horizontally by the handle on top of the appliance.
Adjusting suction power
You can adjust the suction power while vacuum cleaning.
1 Adjust the suction power with the electronic suction power knob (Fig. 13).
- Turn the knob to MAX for maximum suction power (Fig. 14).
Use maximum suction power to vacuum very dirty carpets and hard oors.
- Turn the knob to MIN for minimum suction power.
Use minimum suction power to vacuum curtains, table carpets, etc.
storage
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the 15). mains cord (Fig.
3 Put the appliance in upright position and inser tinto the theridge slot on tothe attach nozzle
the nozzle to the appliance 16). (Fig.
4 Always putT ri-Activthe e nozzle in the carpet setting when you store it and prevent the side
brushes from becoming bent (Fig. 9).
Replacement
Always unplug the appliance before you replace or empty the dustbag and before you replace the
lters.
Replacing the paper dustbag
- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor 17). (Fig.
1 Switch off the appliance and open the dustbag compar 18).tment cover (Fig.
2 Push the dustbag holder backwards (Fig. 19).
3 Pull the cardboard tag upwards to remove the full dustbagThe dustbag from isthe holder.
sealed automatically (Fig. 20).
4 Slide the cardboard front of the new dustbag intothe thedustbag two grholder ooves. of
Press it down as far as possible (Fig. 21). |
ACEC
