Maintenance
Cleaning the CabinetCleaning the Heads and the Tape Paths
Use a soft cloth slightly moistened with a mild To ensure good recording and playback quality,
detergent solution. Do not use a solutionclean the heads A and B, the capstan(s) C,
containing alcohol, spirits, ammonia or abrasives.and pressure roller(s) D after every 50 hoursEnglish
of tape operation.
Cleaning Discs Use a cotton swab slightly moistened with
When a disc becomes dirty,cleaning fluid or alcohol.
clean it with a cleaning cloth. You also can clean the heads by playing a
Wipe the disc from the centrecleaning tape once.
out. Do not wipe in circular
motion.
Do not use solvents such as
benzene, thinner, commercially available cleaners,
or antistatic spray intended for analogue records.
Cleaning the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with PhilipsDemagnetising the heads
Use a demagnetising tape available at your
CD Lens Cleaner or any commercially availabledealer.
cleaner. Follow the instructions supplied with
cleaner.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service centre.
ProblemSolution
CD OPERATION
ONO DISC� is displayed.� Insert a disc.
� Check if the disc is inserted upside down.
� Wait until the moisture condensation at the lens
has cleared.
� Replace or clean the disc, see Maintenance.
ODISC NOT FINALIZED� is displayed.� Use a finalised CD-RW or CD-R.
27
PG 001-028/C270/21-ENG2710/10/03, 12:15 PM |
ACEC
