Connections
Step 3: Connecting TV set
English
Television
Y
DPUUUD((D
(CVBS)
LINEOUT
AUX/TVIN
IMPORTANT!IMPORTANT!
�You only need to make one video� If both S-Video and Component (Pr
connection from the following options,Pb Y) Video connections are used to
according to the capabilities of your TVconnect to your TV set, the Video signal
system.will automatically switch to S-Video
� S-Video or Component Videowhen you power up the system. To set
connection provides higher picturethe VIDEO OUT (put) to �Pr Pb YO, see
quality. These options must be availablepage 31, Using the Setup Menu � Setting
on your TV set.the video out.
� Connect the system directly to the TV
set.
Using component Video In jack
(Pr Pb Y)
Using Video In jack (CVBS)
I Use the component video cables (red/blue/
I Use the composite video cable (yellow) togreen) to connect the systemOs Pr Pb Y jacks to
connect the systemOs CVBS jack to the videothe corresponding Component video input jacks
input jack (or labeled as A/V In, Video In,(or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV
Composite or Baseband) on the TV set.set.
I To listen to TV channels through this system, useI To listen to TV channels through this system, use
the audio cables (white/red) to connect AUX/the audio cables (white/red) to connect AUX/
TV IN (L/R) jacks to the correspondingTV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on the TV set.AUDIO OUT jacks on the TV set.
11 |