ENGLISH9
Types GC2215, GC2120, GC2115, GC2110 and GC2105 only
Water may leak from the soleplate if the set temperature is too low
(MIN to 2).
GC2225, GC2220, GC2130 and GC2125 only.
The iron is equipped with a drip stop system (see also 'Other
features).
Ironing without steam
1Set the steam control to position O (= no steam).
2Set the temperature dial to the recommended position.
See 'Setting the temperature'.
Other features
Spraying
To remove stubborn creases at any temperature
1Make sure that there is enough water in the water tank.
C2Press the spray button several times to moisten the garment
to be ironed.
Extra Steam (type GC2105 only)
This function provides extra steam to remove really stubborn creases.
The Extra Steam function only works at temperature settings between
3 and MAX.
C1Set the steam control to maximum position E.
C2Press and hold the Steam Control button down for max.
5 seconds.
3Wait at least 1 minute before using Extra Steam again to
prevent water from dripping out of the soleplate. |
ACEC
