MAN-CNDV-40R-EN.book Page 106 Tuesday, May 3, 2005 2:51 PM
9If necessary, select ?Summer Time? and
set to summer time.
Summer time is off by default. Select
?Summer Time? and click the OK button to
change the time if summer time is in effect.
This turns the display below Summer Time
?On?.
When the installation is complete, the
opening display appears.
10To complete the setting, select ?Back?
and click the OK button.
6Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7Check the details of the cautionary
message and click the OK button.
The map of your surroundings appears.
8To set the time difference, select ?+? or
?-? and click the OK button.This completes the setup of your Navigation
System. Chapter 1 explains the basic operation of
your Navigation System.
2 To change the language and time later ž
Page 51
If You Have Changed the
Appendix
System ConfigurationTime difference
The time difference between the time If you have replaced the remote control or
originally set in the navigation system (Central configured another display (or AV Head Unit) in
European Time) and the current location of the system, several settings must be changed in
order for the system to work normally.
your vehicle is shown. If necessary, adjust the Read the appropriate section carefully before
time difference. Selecting ?+? or ?-? changes using the navigation system.
the time difference display in one-hour
increments. The time difference can be set
from +3 to -3 hours.About the Dipswitch Setting of
the Remote Control
This manual describes the operation based on
the Remote Control ?CD-R11?. According to the
Remote Control you are using, some button
names of the Remote Control may be different
from this manual.
106 |
ACEC
