BEFORE USING (PART NAMES AND FUNCTIONS)
8. Channel 2 input selector switch14. Channel equalizer high-range sound adjust dials
SOUND 2:(EQ HI)
Dedicated input for DJ CD players supporting digital linkAdjusts each channelOs high-range sound.
(mini DIN connector).(Adjustable range: �26 dB to +6 dB)
LINE:15. Channel equalizer mid-range sound adjust dials
Phone type connector (when a monaural signal is
(EQ MID)
connected to only the L channel, the signal is input to bothAdjusts each channelOs mid-range sound.
L and R channels).(Adjustable range: �26 dB to +6 dB)
CD/LINE:
RCA type connector with line level input.16. Channel equalizer low-range sound adjust dials
(EQ LOW)
PHONO:Adjusts each channelOs low-range sound.
RCA type connector with phono level input.
(Adjustable range: �26 dB to +6 dB)
9. Channel 3 input selector switch17. Channel level indicators
DIGITAL:
RCA type connector with coaxial cable digital input.Displays each channel level. The display provides 2
LINE:seconds peak hold.
Phone type connector (when a monaural signal is18. Headphone CUE button/indicators
connected to only the L channel, the signal is input to bothThe selected source to be monitored by headphones is
L and R channels).chosen by pressing the CUE button for RETURN 1, RETURN
CD/LINE:2, channel 1-6, or MASTER. When multiple buttons are
pressed at once, the selected audio sounds are mixed.
RCA type connector with line level input.
PHONO:When a button is pressed again, the selection is canceled.
RCA type connector with phono level input.The buttons of unselected sources light dimly, and the
buttons of the selected sources light brightly.
10. Channel 4 input selector switch
DIGITAL:
RCA type connector for coaxial cable digital input.Fader control section
LINE:19. Curve adjust channel fader dial
Phone type connector (when a monaural signal is(CURVE ADJUST CH FADER)
connected to only the L channel, the signal is input to bothAdjusts the curve characteristics of the channel fader.
L and R channels).(P.13)
CD/LINE:20. Curve adjust cross fader dial
RCA type connector with line level input.(CURVE ADJUST CROSS FADER)
PHONO:
Adjusts the curve characteristics of the cross fader. (P.13)
RCA type connector with phono level input.21. CROSS FADER ASSIGN switches/indicators
11. Channel 5 input selector switch
Selects which side of the cross fader the output from each
DIGITAL:channel is directed to. (When multiple channels have been
RCA type connector for coaxial cable digital input.selected in the same side, the combined sum is assigned to
SUBMIC:that side.)
Phone type connector for sub microphone input
A:
(monaural).The channel output is directed to the A side (left side) of the
CD/LINE:cross fader. The A indicator will light.
RCA type connector with line level input.
PHONO:THRU:
The channel output is directed to the master output without
RCA type connector with phono level input.going through the cross fader. Both A and B indicators will
12. Channel 6 input selector switchgo out.
DIGITAL:B:
RCA type connector for coaxial cable digital input.The channel output is directed to the B side (right side) of
SUBMIC:the cross fader. The B indicator will light.
Phone type connector for sub microphone input
22. Cross fader assign A indicator (A)
(monaural).Lights orange when power is ON.
CD/LINE:
RCA type connector with line level input.23. Cross fader slider
PHONO:The audio directed to either the A side or B side by the
CROSS FADER ASSIGN switch for each channel is output in
RCA type connector with phono level input.accordance with the cross fader curve set by the CURVE
13. Channel 1-6 TRIM adjustment dials
ADJUST dial (CROSS FADER).
Adjusts each channelOs input level.
(Adjustable range: � to +9 dB, approaches 0 dB at mid-
point)
10
<DRB1372>
En |
ACEC
