DV370_VRB1329A.book Page 31 Monday, December 22, 2003 6:13 PM
Initial Settings menu07
English
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
Note
video output settings, parental lock settings,
and display settings, among others.Y In the table below, the default setting is
shown in bold: other settings are shown in
If an option is grayed out it means that it
italics.
cannot be changed at the current time. This is
usually because a disc is playing. Stop the Y The Digital Audio Out settings only need to
disc, then change the setting.be set if you have connected the digital
output of this player to an AV receiver, or
1 Press HOME MENU and select ?Initial
other equipment.
Settings?.
Y Check the operating instructions supplied
with your other equipment to see which
Initial Settings
digital audio formats itOs compatible with.
2 Use the cursor buttons and ENTER to Y Some settings, such as TV Screen, Audio
select the setting and option you want to Language and Subtitle Language may be
set.overridden by the DVD disc. Often these
All the settings and options are explained on settings can also be made from the DVD
the following pages.disc menu.
Digital Audio Out settings
SettingOptionWhat it means
Digital OutOnDigital audio is output from the digital outputs.
OffNo digital audio output.
Dolby Digital OutDolby DigitalDolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCMDolby Digital audio is converted to PCM audio before being
output.
DTS OutDTSDTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
OffNo digital audio is output when playing a DTS disc.
96 kHz Out96kHz > 48kHz96kHz digital audio is converted to 48kHz for digital output.
96kHz96kHz digital audio is output as is at 96kHz.
31
En |
ACEC
