8 Additional Information
Noticeable difference in DVD and CD volume.The disc containing the MP3 tracks wont play.
" DVDs and CDs use different recording methods." If the disc is a recordable CD, make sure that the disc
is finalized. If the message UNPLAYABLE MP3
This is not a malfunction.
FORMAT is displayed when you try to play a disc/
track:
Cannot play multi-channel audio
Check that the track(s) are in the MPEG1 Audio
" Make sure that 5.1 Channel is selected in the Audio
Layer 3 format.
Out menu (page 43).
Check that the sampling rate of the track(s) are
" Check that the settings in the Speaker Setting screen
44.1 or 48kHz.
are correct (page 44).
" Check the audio options available from the discs
Some MP3 tracks appear to be missing from a
menu.
disc.
" If a track name does not end in .mp3 or .MP3 , thisNo digital audio output
player will not recognize it as an MP3 track.
" Check that Digital Out setting is set to On (page
" This player only recognizes the first 250 folders and
42).
tracks on a disc. If there are more folders/tracks than
" Some DVD-Audio discs prohibit digital audio output.
this, you will not be able to play them.
" No digital audio is output when playing SACDs.
" This player is not compatible with multi-session discs.
If the disc is multi-session, you will only be able to
Cannot output 192kHz or 176.4kHz digitalplay tracks recorded onto the first session.
audio.
The player does not output digital audio at theseThe audio recorded on the disc is not output
sampling rates.properly.
" If the audio is switched to [2] when playing a Super
Cannot output 96kHz or 88.2kHz digital audio.VCD that contains only one stereo soundtrack, there
may be no sound at all. To restore the sound, return
" Check that the Linear PCM setting is not set to
the AUDIO button back to its original position (page
Down Sample On (page 41).
26).
" Some discs are digital copy protected and do not
output high sampling rate digital audio.
Cant perform frame search, or the frame
number is not displayed
No DTS audio output.
" Check that the Frame Search option is set to On
" If this unit is connected to a non-DTS compaible
(page 47).
amplifier or decoder using a digital audio cable, set
" You can only use frame search with DVD-Video discs.
DTS Out to DTS 3 PCM in the Setup menu. If you
do not do this, noise will be output if you try and play" Frame numbers are only displayed with DVD-Video
a DTS disc.discs, and only when the disc is paused or during frame
" If this unit is connected to a DTS-compatible amplifieradvance/reverse.
or decoder using a digital audio cable, check the
amplifier settings, and that the cable is properlyFrame search doesnt find the frame number
connected.
input, or some frames are skipped when using
frame advance.
Audio mix does not sound right or sounds
" You may experience this with discs recorded in 24
incomplete (for example, inaudible dialog).frames/second progressive scan format. With these
" Incorrect Setup menu settings.discs, the player misses one frame every six frames. For
this reason, the frame numbers do not appear
Make sure that 2 Channel output is selected for
continuous when using frame advance, and it may not
the Audio Out menu option if you've connected
be possible to display the exact frame you searched for.
to the stereo inputs on your amplifier or TV (page
The player does not actually drop any frames that are
43).
recorded on the disc, however.
" If the power is switched off before exiting the Setup
menu, the settings are not stored.
Make sure that you exit the Setup menu after
changing any settings before switching off.
64
En |
ACEC
