AL-1633_1644_EX.book 46 Mo+ 9Ţ9�9�9�9�9�?9Ţ9�a?�?a?
?�9ä(9Ţ9� 1
TROUBLESHOOTING
MACHINE/COPYING PROBLEMS
The following problems are related to the general operation of the machine and copying.
ProblemCause and solutionPage
The machine is not plugged into a power outlet.
-
? Plug the machine into a grounded outlet.
Power switch OFF.
15
? Turn the power switch ON.
The POWER SAVE indicator ( ) is blinking.
? Indicates that the machine is warming up. Copies cannot be 15
made until the machine has finished warming up.
The front cover or the side cover is not completely
closed.-
? Close the front cover or the side cover.
The machine does not operate.
The machine is in auto power shut-off mode.
? In auto power shut-off mode, all lights are off except the POWER
15
SAVE indicator () and ON LINE indicator ( ). Press the
[START] key () to resume normal operation.
PAPER SIZE indicator is blinking.
? A blinking paper feed location means that the size of paper
loaded in the tray is different from the paper size setting for the
tray. Change the paper size setting.
19
To clear the display, do one of the following:
Use the [TRAY SELECT] key () to change the tray selection.
Open and close the tray.
Press the [CLEAR ALL] key ().
Select the correct original type for the original.
? Select AUTO with the [AUTO/TEXT/PHOTO] key or press the 24
[Light] key () and [Dark] key () to manually select an
Copies are too dark or too light.appropriate exposure.
? If the copy is too light or too dark even though AUTO was 36
selected with the [AUTO/TEXT/PHOTO] key
(AUTO //), adjust the automatic exposure level.
The original is not placed face up in the SPF or face down
on the document glass.
Blank copies.21, 22
? Place the original face up in the SPF or face down on the
document glass.
The original was not placed in the correct position.
21, 22
? Place the original correctly.
An appropriate ratio was not used for the size of the
original and the size of the paper.
25
Part of the image is cut off or there ? Press the [AUTO IMAGE] key (AUTO% ) to have the copy made
is too much blank space.using the appropriate ratio for the original and paper.
The size of paper loaded in the tray was changed without
changing the tray's paper size setting.
19
? Be sure to change the tray's paper size setting whenever you
change the size of paper loaded in the tray.
The paper is outside of the specified size and weight
range.16
? Use copy paper within the specified range.
Wrinkles appear in the paper or
Paper curled or damp.
the image disappears in places.
? Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time, -
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
46 |
ACEC
