PROGRAMMING
Enter the numbers of the end Repeat steps 6 and 7 until all end
68
receiving machines.receiving machines are entered.
Touch a key and then enter the number of an end
receiving machine as explained below.
After entering a number, touch the [NEXT 9To check the entered numbers of the
ADDRESS] key to enter the number of the next end receiving machines, touch the
end receiving machine.[ADDRESS REVIEW] key.
DIRECT ADDRESS / RELAY GROUPNEXTEXITREC.A list of the entered end
receiving machines is
RECIPIENTOK
REC.displayed.
DIALREC.RAPIDREC.You can delete a
SPEEDREC.GROUPREC.ADDRESS REVIEWmachine by touching it.
When a message
ADDRESS REVIEW
appears asking if you
want to delete the
[DIAL] key
destination, touch the
Enter the fax number of the receiving machine with the
[YES] key.
numeric keys.
Touch each tab at the bottom of the list to show the
[RAPID] keynumbers on that tab.
Touch this key to enter a rapid number from 01 to 99
that is stored in the relay machine. You can also enter
Touch the [OK] key.
10
a 3-digit rapid number from 001 to 099 (enter the lower
two digits of the number).*
The destination/relay group storing screen
Touch the or key to enter the number.
appears.
Continuing to touch the key makes the number change
quickly.
If you are finished storing relay
[SPEED] key11
groups, touch the [EXIT] key.
Touch this key to enter a speed dial number from 00 to
99 that is stored in the relay machine. You can also If you wish to store another relay
enter a 3-digit rapid number from 100 to 199 (enter the group, touch the [NEXT] key.
lower two digits of the number).*
If you touch the [EXIT] key, you will return to the
Touch the or key to enter the number. screen of step 4 on page 67.
Continuing to touch the key makes the number change
If you touch the [NEXT] key, the screen for
quickly.
storing a new relay group appears.
[GROUP] key
6
Touch this key to enter a group key number from 01 to
99 that is stored in the relay machine.
You can also enter a 3-digit rapid number from 201 to
299 (enter the lower two digits of the number).*
Touch the or key to enter the number.
Continuing to touch the key makes the number change
quickly.
* The numbers entered will vary depending on the
model used for the relay machine. For more
information, consult your authorised service
representative. (Also see the operation manual for
copier.)
Touch the [OK] key.
7
The screen for entering
CANCELOK
the numbers of the end
receiving machines
appears.
77 |
ACEC
