CD-BK100W
TroubleshootingMaintenance
? If trouble occurs? Cleaning the tape-handling parts
zDirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
When this product is subjected to strong external interference (mechanical shock,
these parts with a cotton swab moistened with commercial head/pinch roller
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
cleaner or isopropyl alcohol.
operated incorrectly, it may malfunction.
z When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.B
AC
2 If the unit is not restored in the previous operation, unplug and plug in the unit,TAPE 1
and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
EBC
D
TAPE 2
? Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by mode.
2 Whilst pressing down the / button and the EQUALIZER/X-BASS/DEMO but-
ton, press the ON/STAND-BY button until "CLEAR AL" appears. Playback headErase head
CapstanRecording/Playback head
Pinch roller
Caution:
This operation will erase all data stored in memory including clock, timer settings,
z After long use, the deck's heads and capstans may become magnetised, causing
tuner preset, and CD programme.poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
? Before transporting the unit
? Cleaning the cabinetReferences
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.Periodically wipe the cabinet with a soft cloth and a diluted
3 Press the OPEN/CLOSE button to open the disc tray.soap solution, then with a dry cloth.
Remove all CDs from the unit.
4 Press the OPEN/CLOSE button to close the disc tray.Caution:- Troubleshooting / Maintenance -
Make sure that "NO DISC" is displayed.z Do not use chemicals for cleaning (petrol, paint thinner,
5 Press the ON/STAND-BY button to enter the stand-by mode, and then uetc.).nplug It may damage the cabinet finish.
the AC power lead from the AC socket.z Do not apply oil to the inside of the unit. It may cause
malfunctions.
ENGLISHE-24
01/6/17CDBK100W_E_3.fm |
ACEC
