CD-BK147V
System connections (continued)
? To mount the surround speakers on the ? Connecting the AC power lead
After making all connections, connect the AC power lead to the unit
wall
and then into the wall socket. If you plug in the unit first, it will enter
The design of the surround speakers allows them to be hung on the wall. Be sure tothe demonstration mode.
use the type and size of screw that is shown to the below.
Notes:
3.2 mm (1/8")
z Unplug the AC power lead from the AC socket if the unit will not be in use for a pro-5 mm (3/16")
longed period of time.
z Never use a power lead other than the one supplied. Use of a power lead
other than the one supplied may cause an electric shock or fire.
AC Plug AdaptorMin. 22 mm (7/8") 9 mm (3/8")
In areas (or countries) where an AC socket as shown in illustration is used, con-
nect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC
1Drive one screw through theplug adaptor is not included in areas where the AC wall socket and AC power plug
can be directly connected (see illustration ).5 mm (3/16")
wall for each speaker.
z Make sure that both the screw
and the wall can support a load Wall mounting screw
of 20 kg (45 lbs.).1
z Drive the screws, so there is Wall surface Min. 17 mm (11/16")
about a 5 mm (3/16") space be-
tween the wall and the head of
the screw.
2Mount the surround speaker
on the wall so that the screw
- System connections -head is inserted into the slot2
on the surround speaker.
Preparation for Use
Wall surface
? Setting the AC voltage selector
? Headphones
Check the setting of the AC voltage selector located on the rear panel before plug-
ging the unit into an AC socket. If necessary, adjust the selector ztBoe fcorresore plpond to theugging in or unplugging the headphones, reduce
AC power voltage used in your area.the volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter
plug and are between 16 ohms and 50 ohms impedance.
Turn the selector with a screwdriver until the appropriate voltage num-The recommended impedance is 32 ohms.
ber appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
z Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME but-
tons.
ENGLISH
E-9 Demonstration mode (See page 11.)
01/8/29CD-BK147V(X)E1.fm |
ACEC
