Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the
OUTPUT signal selection for SCART 2
SCART lead to switch the television to the correct Input
socket. Alternatively press the external source selection
button Buntil the picture from connected equipment is
This enables selection of the source to output from
shown.
SCART 2. For example, to record transmissions in stereo
from a stereo decoder � connect a stereo decoder to
An S in the display e.g. EXT2S, indicates the input is set
SCART 1 and stereo VCR to SCART 2, then select EXT1 asfor an S-Video signal.
the EXT2 Output. The signal received through SCART 1
will output directly through SCART 2.
Input selectionSelect EXT2 Output.
1
Use the Input Selection if the television does not switch
over automatically.
Feature menu
EXT2 InputzVideox
EXT2 OutputzEXT1x
Press B to select EXT1, EXT2 or EXT3.Horizontal Positionzx
1
Widthzx
To return to television mode press B again orVertical Positionzxzx
2Height
one of the numbered buttons.Panel LockzOffx
Automatic FormatzOffx
Blue ScreenzOnx
EXIT To Exit feSelectzxAdjust
INPUT signal selection
Use Sor Rto change the EXT2 Output option to:
2
This specifies the type of signal going into SCART 2 (EXT2)
Monitor = The picture on screen.
on the back of the television. Please refer to the
manufacturersO instructions for the connected equipment.EXT1 = The picture from equipment connected to
SCART 1.
From the Feature menu select EXT2 Input
1EXT3 = The picture from equipment connected to
S Rthe front input sockets.and with or select either Video or
S-VIDEO as the required input.
TV = The last television programme selection.
If the colour is missing try the alternative setting.
Feature menu
EXT2 InputzVideox
EXT2 OutputzEXT1x
Horizontal Positionzx
Widthzx
Vertical Positionzx
Heightzx
Panel LockzOffx
Automatic FormatzOffx
Blue ScreenzOnx
EXIT To Exit feSelectzxAdjust
16 |
ACEC
